01
TRUMPF CO2 to Fiber Laser
Replace the legacy CO2 beam source and beam delivery with a fiber laser architecture while retaining suitable mechanical assets.
View Service
Retrofit Engineering
Laser Cutting System Retrofits, Control Upgrades & High-Performance Machines
Extend the working life of proven equipment with an engineering-led retrofit. Arkmex upgrades legacy CO2 laser sources, control platforms, motion interfaces, cutting heads and auxiliary systems around your machine condition and production target.
Machine Condition AssessmentControl & Motion IntegrationOn-Site CommissioningRemote Technical Support
Retrofit Engineering
Seven core laser cutting retrofit and upgrade services
A successful retrofit starts with the condition of the existing machine—not with a parts list. We review the mechanical platform, drive architecture, electrical drawings, safety chain, gas circuit and production target before defining the upgrade.
01
02
TRUMPF Control to CypCut
Modernize an aging TRUMPF control architecture with a Bochu cutting platform after drive, I/O and safety compatibility review.
View Service
03
Beckhoff Control to CypCut
Re-engineer Beckhoff-based control and motion functions around a suitable Bochu platform with machine-specific EtherCAT and I/O planning.
View Service
04
PA8000 to CypCut
Replace an obsolete PA8000 control path with a maintainable Bochu platform and updated control cabinet interfaces.
View Service
05
Fagor Control to CypCut
Migrate a Fagor-based laser cutting control to a Bochu platform with coordinated motion, height control and process I/O.
View Service
06
CypCut System Upgrade
Upgrade an existing CypCut/FSCUT installation for improved maintainability, supported hardware, higher power or expanded process functions.
View Service
07
Low to High-Power Fiber Laser
Increase laser power only after validating the machine frame, motion, cutting head, chiller, extraction, gas, electrical supply and control architecture.
View ServiceRetrofit Engineering
Compatibility comes before configuration
Every project requires a machine-specific assessment. Final hardware, software and achievable performance depend on the existing mechanical accuracy, drive system, I/O, electrical cabinet, safety circuit and selected laser power.
Assessment Checklist
- Machine brand, model and year
- Current controller, drives and fieldbus
- Laser source, cutting head and chiller
- Electrical drawings and safety circuit
- Target materials, thickness and laser power
Project Deliverables
- Machine compatibility report
- Retrofit architecture and bill of materials
- Electrical and I/O integration plan
- Installation and parameter commissioning
- Operator training and handover records
- Remote support after commissioning
Retrofit Engineering
From machine survey to production handover
-
01
Machine survey
Collect model, year, controller, source, drives, drawings and fault history.
-
02
Compatibility review
Verify mechanics, motion, I/O, safety, utilities and target laser power.
-
03
Retrofit engineering
Define control, optics, electrical, cooling, gas and safety integration.
-
04
Installation & commissioning
Install hardware, map I/O, tune motion and complete process parameter setup.
-
05
Training & support
Validate cutting samples, train operators, document the final configuration and provide post-commissioning support.
Retrofit Engineering
Selecting the right Bochu control platform
CypCut is a leading Chinese sheet-metal laser cutting software platform. Depending on power, motion architecture and process requirements, a project may use CypCut, CypCutPro or an EtherCAT-based FSCUT8000/HypCut solution.
Laser Cutting Machines
All Machines
Send your cutting requirements and our team will recommend a suitable configuration.
AX-3015E
Sheet Fiber Laser Cutting Machine
For thin sheet metal, workshops, kitchenware, cabinets, panels, and custom metal parts.
- Power Range
- 1.5kW-3kW
- Cutting Size
- 3000*1500mm
- Cutting Thickness Range
- 1-5mm
- Suitable Materials
- Stainless steel / Carbon steel / Aluminum
- Typical Machine Recommendation
- Sheet metal fabrication, kitchenware, machinery parts, metal cabinets, panels
AX-6020H
High Power Fiber Laser Cutting Machine
For thick plate cutting, machinery manufacturing, steel structures, and high-volume production.
- Power Range
- 6kW-20kW
- Cutting Size
- 4000*2000mm / 6000*2000mm
- Cutting Thickness Range
- 5-30mm
- Suitable Materials
- Stainless steel / Carbon steel / Aluminum
- Typical Machine Recommendation
- Thick metal, machinery manufacturing, steel structure, high-volume production
AX-6000T
Tube Fiber Laser Cutting Machine
For tube cutting, furniture frames, automotive parts, fitness equipment, and machinery frames.
- Power Range
- 1.5kW-3kW
- Cutting Diameter
- 10*350mm
- Cutting Thickness Range
- 1-5mm
- Suitable Materials
- Stainless steel / Carbon steel / Aluminum
- Typical Machine Recommendation
- Tube cutting, pipe processing, furniture structures, automotive parts, fitness equipment
Engineering support across the complete retrofit lifecycle
Engineering services for upgrading legacy laser sources, CNC controls, motion systems, cutting heads and auxiliary equipment.
- Machine Condition Assessment
- Control & Motion Integration
- On-Site Commissioning
- Remote Technical Support
- Machine-specific engineering
- Documented project handover
Planning a Laser Cutting System Retrofit?
Send the machine brand, model, year, current controller, laser source, target power and recent machine photos. We will review technical compatibility before recommending a retrofit scope.
Request Retrofit Assessment